FabulaTech Forum
        (http://www.serial-port-mapper.com/forum)
      

        Serial Port Solution >> Network Serial Port Kit >> Problem Network simultaneous connect
        
(Message started by: matteo on Jul 28th, 2005, 1:55am)
Title: Problem Network simultaneous connect
Post by matteo on Jul 28th, 2005, 1:55am
I have unloaded the demo version ,
my problem is:
on the "server" where I have in share one serial port
(com1 phisical)
not accecpt simultaneous connections, but only one occupying the serial port

Is a restriction of the trial version ?
Is possible to have a simultaneous connections ?

Excuse me for my english
Many thanks in advance

Matteo
Title: Re: Problem Network simultaneous connect
Post by Andrew on Jul 28th, 2005, 2:23am
Hello, Matteo.
We are working over this feature and it will be available in the next program version.

In any case I can propose you the following temporary solution:

1) Use our Serial Port Splitter to split Physical com1 to several virtual ports (e.g. com11, com12, com13, com14)

2) Use Network Serial Port Kit to share these ports (com11, com12, com13, com14)

3) On client side use Network Serial Port Kit and connect to needed shared com ports.

If this solution suits your needs, we can offer Serial Port Splitter for you for free.
Title: Re: Problem Network simultaneous connect
Post by Leaderaa on May 25th, 2007, 10:43pm
Hi,

I also have the same problem.. did a newer version of NSPK came out yet?
Title: Re: Problem Network simultaneous connect
Post by Andrew on May 29th, 2007, 6:49am
Hi,
please use Serial Port Splitter with Network Serial Port Kit together (as I described before). Using Splitter, you can split COM port on server side to several COM ports. Then using Network Serial Port Kit on server side, you can share all these COM ports. Then you can connect to specified shared COM port from client side using Network Serial Port Kit.
If any issues with it, please let us know.
Thank you.